.jpg)
🔧 Set of 4 Front Brake Pads for Iveco Daily 35S 35C 29L – Performance and Safety
📦 Detailed description
This kit set of PLATE front brake pads is designed to ensure optimal braking on your Iveco Daily 35S, 35C, and 29L.
✔️ Brake pads x4 – Ensure optimal braking power.
✔️ Slide screws x2 – Enable secure caliper mounting.
✔️ Caliper caps x2 – Protect the slides from dust and moisture.
✔️ Anti-noise springs x2 – Reduce vibrations and noise during braking.
🚛 Compatibility and installation
✔️ Compatibility: Adaptable to Iveco part number IVE42561355
🔹 Compatibility: This kit is designed for Iveco Daily 35S, 35C, and 29L models from 2006 onwards.
📌 Location: Mounts on the front axle of the vehicle.
💡 Maintenance tip: For optimal performance, also replace the wear indicators and kit sliders when changing the PLATE brake pads on your IVECO Daily.
📖 Installation tutorial: Replace your front pads and discs with ease!
🛠 Required tools:
🔧 BTR bits
🔧 Ratchet with extension
🔧 17/24/27 mm sockets
🔧 Large hammer
🔧 Flat [[CT:
c3e888ce42796ce1d5780a4ea8197f0a]] 🔧 Pushback piston or clamp GASKET
🔧 Wire brush
🚗 Important steps for changing your PLATEts and front brake discs
1️⃣ Remove the front wheels: Use a 27 mm sleeve after lifting the vehicle and securing it with jack stands.
2️⃣ Removing the front hub: Use a 17 mm sleeve to remove the hub.
3️⃣ Removing the brake caliper:
- Remove the CAPs from the slides using a flat SCREW screwdriver.
- Remove the SCREW slide pins to remove the caliper.
4️⃣ Removing the bracket from the caliper: Use a 24 mm sleeve to remove the bracket from the rear.
5️⃣ Remove the brake discs: - Tap the back of the disc firmly with a large hammer to loosen it.
- Clean the mounting surface with a wire brush and a coat of bellows.
6️⃣ Preparing the new disc: Unpack and degrease the disc with brake cleaner.
7️⃣ Installing the new disc: Place the disc on the hub and re-tighten it.
8️⃣ Cleaning and installing the caliper pads: - Clean the caliper with a wire brush.
- Install the new ressorts of PLATEts.
9️⃣ Reassembly of the bracket caliper: ReSCREW it using the 24 mm sleeve.
🔟 Installing the PLATEts: Reposition them in the bracket of PLATEttes.
1️⃣1️⃣ Push back the pistons of the caliper: - Use a clamp if you don't have a piston repeller.
- Press with an old PLATE to push the piston straight back.
1️⃣2️⃣ Check the caliper slides: If they are seized, use a new kit slide (available as an accessory).
1️⃣3️⃣ Installing the wear indicators: Clip them onto the PLATEtte and refit the brake caliper.
1️⃣4️⃣ Finalization: Tighten the new SCREWs on the sliders and replace the CAPs on the caliper.
🚨 Before driving off, slowly press the brake pedal until it hardens to properly reposition the pistons and avoid any risk.
🚀 Why choose RAXOR PARTS?
✅ Express shipping: Receive your parts quickly to reduce vehicle downtime.
💰 Competitive prices: Enjoy excellent value for money.
🔧 Expert customer support: A team of professionals is available to ensure compatibility and assist you during installation.
🔗 Related accessories for optimal maintenance
For complete and safe braking, we also recommend:
🛠 Front brake discs – For optimal braking.
🛠 Brake calipers – Ensure uniform pressure on your PLATEts.
🛠 Wear indicators – Replace them to anticipate wear on your PLATEts.
🛠 Slide kit – Essential in case of seized slides.
All these spare parts for Iveco Daily are 100% compatible with your Iveco Daily 35S, 35C and 29L!
📞 Need help? Contact us!
📞 By phone: Our advisors are available for fast, personalized assistance.
💬 Online chat: Get an instant response by chatting with our bracket customer service representative.
📩 Contact form: Send your request and receive a response within 24 hours.
🛒 Order your set of front brake pads for Iveco Daily 35S 35C 29L now and ensure safe braking! 🚛🔧
