Complete original left rear light.
Sold with lens and bulb holder
Tutorial on how to install an Iveco Daily rear light
Allow 15 minutes for installation. The operation is very easy to perform!
Toolbox: A ratchet + a 10 mm socket
Here are the important steps for changing your rear light. Follow along with the photos.
1°) Inside the body, behind the light, loosen the 6 nuts with your ratchet and the 10mm socket.SCREW the 6 nuts with your ratchet and the 10mm sleeve
2°) Remove the broken light by disconnecting the 2 terminals
3°) Wipe the outside of the box around the light with a cloth to clean off any dirt so that the new GASKET light is completely watertight.
4°) Connect the 2 terminals to the new light.
5°) Tighten the 6 10 mm nuts to evenly tighten the stove PLATE.
And that's it!
