NH3 sensor 700 mm pour Iveco Daily

🏭 NH₃ Sensor for Iveco Daily – Accurate Monitoring of Ammonia Emissions 🚛

🔍 Product Description

🔧 The NH₃ sensor, also known as an ammonia probe, measures the concentration of ammonia (NH₃) in exhaust gases, enabling the emissions control system to function optimally and comply with strict environmental standards.

🚀 A NH₃ sensor in good condition allows you to:

• ✅ Optimize the operation of the SCR (Selective Catalytic Reduction) system by precisely adjusting the AdBlue injection.

• ✅ Effectively reduce NOx (nitrogen oxide) emissions, thereby contributing to environmental protection.

• ✅ Improve engine performance by ensuring efficient exhaust gas management.

• ✅ Prevent malfunctions in your Iveco Daily's exhaust system by detecting anomalies related to ammonia concentration.

⚙️ Technical Specifications

📌 Vehicle Compatibility:

• ✔ Iveco Daily:

  • Models equipped with Euro 6-compliant diesel engines.

  • Years of production: 2014 to 2021.

📌 Technical Details:

• 🔹 Sensor type: Electrochemical sensor for ammonia (NH₃) detection.

• 🔹 Mounting position: Integrated into the exhaust system, usually downstream of the SCR catalyst.

• 🔹 Connectivity: Specific connector for precise communication with the engine control unit (ECU).

• 🔹 Materials: Designed to withstand the high temperatures and corrosive environments of exhaust gases.

⚠️ When to Replace Your NH₃ Sensor?

🔧 It is essential to monitor the proper functioning of the NH₃ sensor to maintain the performance of the emission reduction system. Here are some signs that replacement is necessary:

❌ The engine light or an emissions-related warning light on the dashboard comes on.

❌ Increased pollutant emissions, detected during a technical inspection or by abnormal exhaust smoke.

❌ Decreased engine performance or increased fuel consumption.

❌ Specific error messages related to the SCR system or AdBlue recorded by the ECU.

🚨 A faulty NH₃ sensor can lead to inefficient emissions management, increased pollutants, and potentially fines for non-compliance with environmental standards!

🛠️ NH₃ Sensor Installation and Replacement

💡 The NH₃ sensor must be replaced with care to ensure the SCR system functions properly.

Replacement steps:

1. Secure the vehicle – Park on a level surface, turn off the engine, and allow the exhaust system to cool completely.

2. Locate the NH₃ sensor – It is usually located downstream of the SCR catalyst in the exhaust system.

3. Disconnect the electrical connector – Make sure the ignition is off before disconnecting the sensor's electrical harness.

4. Remove the old sensor – Remove the sensor using the [[CT:cf511111111111111111111111111111111111[CT:c3e888ce42796ce1d5780a4ea8197f0a]] the sensor using the appropriate TOOL, taking care not to damage the thread or housing.

5. Install the new sensor – Screw the new sensor into place using the torque recommended by the manufacturer.

6. Reconnect the wiring harness – Ensure that the connector is properly attached and secure.

7. Final check – Start the engine and use a diagnostic tool to check for error codes and confirm that the sensor is working properly.

📌 Tip: After replacing the NH₃ sensor, it is recommended to reset the error codes and perform a driving cycle to allow the system to adapt to the new sensor.

🎯 Why Choose Genuine Iveco Parts?

• 🌟 Quality & Reliability – Iveco Genuine Parts are designed to fit your vehicle perfectly, ensuring optimal performance and durability.

• 🚀 Compliance with Standards – Ensure your vehicle complies with current environmental regulations with certified components.

• 🔧 Technical Support – Benefit from the expertise and bracket of Iveco technicians for the installation and maintenance of your Iveco Daily spare parts.

• 💰 Preserved Resale Value – Using genuine parts helps maintain the value of your vehicle on the used market.

🏁 Additional Accessories for an Optimal SCR System

🛠️ To ensure the proper functioning of your emission reduction system, also SCREW:

• 🔹 AdBlue Injector – Ensures precise injection of AdBlue into the exhaust system for effective NOx reduction.

• 🔹 AdBlue Pump – Maintains the pressure required for the SCR system.

• 🔹 AdBlue Tank – Safely stores AdBlue and ensures its supply to the system.

• 🔹 NOx Sensor – Measures nitrogen oxide levels to optimize the catalytic reduction process.

📞 Need help? Contact us!

• By phone – Get fast, personalized assistance by calling our customer service department.
• Contact form – Get a response within 24 hours for any technical questions or CONTROL.
• Online chat – Chat in real time with an expert for immediate advice.

Don't let a faulty rear exhaust TUBE compromise your vehicle's performance! Order your rear exhaust TUBE for Iveco Daily now and enjoy peace of mind on the road.