.jpg)
🔧 Set of 4 Front Pads for Iveco Daily 35S 35C 29L - Performance and Safety
📦 Detailed description
This kit of front brake pads is designed to ensure optimal braking on your Iveco Daily 35S, 35C and 29L.
✔️ Brake pads x4 - Ensure optimum braking power.
✔️ Slider screws x2 - Enable secure caliper mounting.
✔️ Caliper plugs x2 - Protect the sliders from dust and moisture.
✔️ Noise suppressor x2 - Reduces vibration and unwanted noise during braking.
🚛 Compatibility and installation
<✔️ Correspondence : Adaptable to Iveco part number IVE42561355
🔹 Compatibility : This kit is designed for Iveco Daily 35S, 35C and 29L from 2006.
📌 Placement : Mounts to the front axle of the vehicle.
💡 Maintenance tip: For optimum performance, also replace the wear indicators and slider kits when changing the brake pads on your IVECO Daily.
📖 Installation tutorial: replace your front pads and discs with ease!
🛠 Toolbox required:
🔧 BTR bits
🔧 Wrench with extension
🔧 17 / 24 / 27 mm sockets
🔧 Big hammer
🔧 Flathead screwdriver
🔧 Piston plunger or clampseal
🔧 Metal brush
🚗 Important steps for changing your front brake pads and discs
<1️⃣ Removal of front wheels: Use a 27 mm socket after lifting the vehicle and securing the assembly with stanchions.
2️⃣ Front hub removal : Use a 17 mm socket to remove the hub.
3️⃣ Brake caliper removal:
- Remove the slider plugs using a flathead screwdriver.
- Unscrew the slider screws to remove the caliper.
4️⃣ Removing the caliper bracket: Use a 24 mm socket to unscrew the bracket from the rear.
5️⃣ Removing the brake discs: - Tap hard on the back of the disc with a large hammer to loosen it.
- Clean the mounting surface with a wire brush and a blowgun.
6️⃣ Preparing the new disc:Unpack and degrease the disc with brake cleaner.
7️⃣ Installing the new disc: Place the disc on the hub and screw it back on.
8️⃣ Cleaning and installing the caliper brackets: - Clean the caliper bracket with a wire brush.
- Install the new pad springs.
9️⃣ Remounting the caliper bracket: Screw it back on using the 24 mm socket.
🔟 Installing the pads: Reposition them in the pad holder.
1️⃣1️⃣ Push the caliper pistons: - Use a clamp if you don't have a piston plunger.
- Press with an old pad to push the pistons straight back.
1️⃣2️⃣ Check caliper sliders: If seized, use a new slider kit (available as an accessory).
1️⃣3️⃣ Installation of wear indicators: Clip them onto the pad and refit the brake caliper.
1️⃣4️⃣ Finalization: Tighten the new caliper slider screws and replace the caliper caps.
🚨 Before getting back on the road, pump the brake pedal slowly until it hardens to properly reposition the pistons and avoid any risk.
🚀 Why choose KPX PARTS?
✅ Express shipping : Receive your parts quickly to reduce vehicle downtime.
💰 Favourable prices : Enjoy excellent value for money.
🔧 Expert customer support : A team of professionals at your service to guarantee compatibility and guide you through assembly.
🔗 Associated accessories for optimal maintenance
For complete and safe braking, we also recommend:
🛠 Front brake discs - For optimal braking.
🛠 Brake calipers - Ensure even pressure on your pads.
🛠 Wear indicators - Replace them to anticipate pad wear.
🛠 Slider kit - Indispensable in case of seized sliders.
All these spare parts for Iveco Daily are 100% compatible with your Iveco Daily 35S, 35C and 29L!
📞 Need help? Contact us!
📞 By phone : Our advisors are available for fast, personalized assistance.
💬 Online chat : Get an instant response by chatting with our customer support.
📩 Contact form : Send your request and receive a response within 24 hours.
🛒 Order your set of front pads for Iveco Daily 35S 35C 29L now and ensure safe braking! 🚛🔧
