.jpg)
Rear brake wear sensors – Iveco Daily 35S single rear wheels (MY2009 to MY2024)
The rear brake wear sensors for Iveco Daily 35S, reference KPX7355, are electrical sensors integrated into the rear brake pads that trigger the brake wear warning light on the dashboard as soon as the pads reach their critical wear threshold. On Iveco Daily 35S used in intensive professional service — delivery, transport, construction — rear braking is subject to frequent and significant stress. A functional wear sensor is the only early warning system to prevent metal-to-metal braking, which destroys rotors and endangers vehicle and cargo safety.
💡 Supplied as a set of 2 — one complete rear axle set (left + right), ready to install during brake pad replacement.
🔧 Reference and compatibility
KPX Parts reference: KPX7355. Compatible with:
- ✅ Iveco Daily 35S – single rear wheels only
- ✅ MY2009 (2006-2011)
- ✅ MY2012 (2011-2014)
- ✅ MY2016 (2014-2019)
- ✅ MY2019 (2019-2022)
- ✅ MY2022 (2022-2024)
- ✅ MY2024 (from 2024)
- ✅ 2.3L HPI and 3.0L HPI engines
⚠️ These sensors are specific to 35S versions with single rear wheels. They are not compatible with 35C, 50C, 65C, or 70C versions with dual rear wheels whose braking systems differ. If in doubt, contact our technical service with your vehicle's VIN.
⚙️ Technical specifications
✅ Reference: KPX7355
✅ Quantity supplied: 2 sensors (complete rear axle set)
✅ Position: Rear axle – left and right side
✅ Application: Iveco Daily 35S – single wheels – MY2009 to MY2024
✅ Function: Brake pad wear warning light trigger on dashboard
✅ Installation: Direct integration into rear brake pads
✅ Condition: New
⚠️ Signs of defective or worn wear sensor
The wear sensor is a consumable part to be systematically replaced with each rear brake pad change.
- ❌ Brake wear light continuously on on dashboard while pads appear correct — sign of broken or corroded sensor wire
- ❌ Warning light flashing on and off intermittently — poor contact or wire exposed by friction
- ❌ Warning light never illuminates despite worn pads — non-functional sensor, major risk of metal-to-metal braking without alert
- ❌ Visibly corroded sensor or damaged wire during inspection underneath
- ❌ Metallic grinding noise at the rear during braking — sign that sensor or pads have reached their limit
🚨 Never reuse a wear sensor after pad replacement: the metal tang is deformed or cut after contacting the rotor and cannot provide warning function. Systematic sensor replacement with pads is an absolute safety rule.
🔩 Mounting advice
🔹 Always replace wear sensors simultaneously with brake pads — a used sensor will provide no alert during the next wear cycle.
🔹 Check the wire and electrical connector condition during installation: bare wire or corroded connector can cause false alerts or failure to alert.
🔹 Ensure proper sensor positioning in the pad slot before reinstalling the caliper: misplaced sensor can prematurely contact the rotor.
🔹 After installation, perform several progressive braking actions to verify warning light extinguishes on the dashboard.
🔹 Take this opportunity to check rear brake rotor thickness: out-of-spec rotors must be replaced alongside pads for braking effectiveness.
💡 On Iveco Daily 35S in intensive use, inspect rear pad and sensor condition every 30,000 to 40,000 km or at each annual service.
🛒 Complementary parts to replace simultaneously
For complete rear braking system overhaul of your Iveco Daily 35S, find on RAXOR Parts:
- ✅ Complete Iveco Daily braking range – pads, rotors, calipers, sensors
- ✅ Rear brake pads Iveco Daily 35S – must be replaced systematically with sensors
- ✅ Rear brake rotors Iveco Daily 35S – check thickness at each pad change
- ✅ Front brake wear sensors Iveco Daily 35S – check during same service
- ✅ Rear left brake caliper Iveco Daily 35S – verify if leaking or seizing
- ✅ Rear right brake caliper Iveco Daily 35S – opposite side
- ✅ Rear brake hose Iveco Daily 35S – inspect during any braking work
🏆 Why choose RAXOR Parts?
Specialist in Iveco Daily spare parts since 2017, we supply parts selected for compliance with original equipment manufacturer requirements, from brake consumables to complex mechanical components.
- ✅ Over 8,500 references in stock
- ✅ Fast delivery – tomorrow at your door
- ✅ Responsive customer service – phone, online chat, or email
- ✅ Attractive prices and promotions year-round
🚚 Order your Iveco Daily 35S rear brake wear sensors ref. KPX7355 now and guarantee your braking system reliability and safety in all conditions.
