.jpg)
⚙️ Iveco Daily VI 2.3 Catalytic Muffler – Euro 6 Emissions Compliance and Preserved Engine Performance
🔧 What is this part used for?
The catalytic muffler is the central component of the Iveco Daily VI’s exhaust aftertreatment system. It combines an oxidation catalyst and a diesel particulate filter (DPF). The catalyst oxidizes unburned hydrocarbons and carbon monoxide in the exhaust gases. The filter then traps fine soot particles, which are burned off during regeneration cycles. This dual treatment allows the vehicle to comply with the Euro 6 standard. A clogged or damaged catalytic muffler causes backpressure in the exhaust system, forces the vehicle into degraded mode, and, eventually, renders the vehicle inoperable.
This genuine Iveco part is offered brand new. It is an exact replacement for the original equipment catalytic converter/DPF assembly on the Iveco Daily MY2014, MY2016, MY2022, and MY2024 models equipped with the 2.3 Euro 6 engine, without requiring any modifications to the exhaust system or mounting brackets.
✅ Technical
Specifications Compatibility: Iveco Daily MY2014, MY2016, MY2022, MY2024 – 2.3 F1A Euro 6 engine (33S, 35S, 35C, 42S)
Type: Catalytic silencer – integrated
oxidation catalyst and particulate filter Location: Exhaust system, downstream of the turbocharger
Function: Oxidation of hydrocarbons and retention/combustion of soot
particles Standard: Euro 6
Quality: Genuine Iveco
part Condition: New
OEM Part Number: 5802526552
Part Number: IVE5802526552
✅ Why replace this part?
✅ A clogged particulate filter that regeneration cycles can no longer clean creates backpressure, which reduces engine power and increases fuel consumption.
✅ A cracked, melted, or damaged substrate allows particles and pollutants to pass through. The vehicle then no longer meets emissions standards and risks failing its vehicle inspection.
✅ A new, genuine Iveco catalytic muffler restores compliant emissions control, eliminates reduced-power mode, and restores the engine to its original performance.
✅ Signs of wear, failure, or the need for replacement
A faulty catalytic muffler most often manifests as the DPF warning light or engine warning light coming on, accompanied by a switch to degraded mode with a noticeable loss of power. Increasingly frequent regeneration cycles or failed regeneration attempts, higher fuel consumption, or abnormal exhaust smoke are also characteristic signs. Reading the fault codes and differential pressure sensor values using a diagnostic tool can confirm clogging. It is essential to identify the root cause before replacement: a faulty fuel injector, a clogged EGR valve, an oil leak from the turbocharger, or a defective sensor can quickly clog a new filter.
✅ Installation
Tips Work on a cold exhaust system and disconnect the temperature and differential pressure sensors before removal. Always replace the exhaust gaskets and check the condition of the clamps, mounts, and rubber bushings in the exhaust system. Verify that the sensors are functioning properly and inspect the condition of their pressure-sensing hoses, which are often weakened by heat. After installation, the particulate filter’s adaptation values must be reset using an Iveco-compatible diagnostic tool so that the ECU can account for the new part. Installation by a qualified professional is recommended.
✅ Technical advice from RAXOR Parts
A particulate filter never clogs for no reason: before installing a new catalytic silencer, identify and address the root cause of the problem to prevent the issue from recurring. A clogged or stuck EGR valve significantly increases soot production; check it and its sensors among our selection of Iveco Daily EGR valves and sensors. An oil leak at the turbocharger can also clog or damage the filter substrate: check the condition of your turbocharger and, if necessary, browse our selection of Iveco Daily turbochargers and turbocharger parts. To complete the repair, gaskets, clamps, hoses, and mufflers are available in our Iveco Daily exhaust section, and most of the parts compatible with Euro 6 models are featured in our selection of essential Iveco Daily Euro 6 exhaust parts.
✅ Why choose RAXOR Parts?
✅ Genuine Iveco catalytic muffler, part number 5802526552, compatible with the Iveco Daily MY2014, MY2016, MY2022, and MY2024 models with the 2.3 Euro 6 engine; direct fit without modification.
✅ Gaskets, sensors, EGR valves, turbos, and exhaust parts are available to address the root cause of the problem and restore the entire system to working order in a single order.
✅ In-stock items and fast shipping to minimize downtime for your work vehicle.
Contact
📧 Contact us by email for any compatibility questions.
💬 Use the live chat for a quick response.
🚚 Order your Iveco Daily
catalytic muffler now Order your genuine Iveco catalytic muffler today at RAXOR Parts and receive it quickly, ready to install on your Iveco Daily.
